Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
When we received this pair, the cabinet surfaces had scratches and dented areas, while the cabinet interiors and driver surfaces needed cleaning. Low-frequency driver rubbing, aged suspension and adhesive areas, the front level controls, and crossover circuitry required attention.
During Restoration
Drivers: We tested individual driver sections and measured their DC resistance.
Bass Driver / Voice Coil: We addressed low-frequency cone rubbing and serviced the affected cone, surround, edge, and adhesive areas.
Midrange & Treble: We inspected and serviced the midrange and high-frequency driver areas identified during the evaluation.
L-Pads / Level Controls: We cleaned and repaired the front Energy and Roll-Off control assemblies.
Crossover: We inspected the crossover networks, cleaned the circuit board areas, and repaired the affected circuitry.
Capacitors: We inspected and measured the capacitors, replacing out-of-spec units with quality components of the correct electrical values.
Speaker Jacks & Wiring: We inspected the speaker connection jacks and internal wiring.
Cabinet Restoration: We addressed scratches and dents, repaired local veneer damage, sanded affected areas, and completed PU finish touch-ups.
Internal Cleaning: We removed accumulated dust and cleaned accessible driver and crossover surfaces inside the cabinets.
Control Knobs: We cleaned the knob assemblies and cleared dust from the level-control areas.
Badges & Labels: We refreshed the logo detailing and cleaned identification surfaces.
Grilles: We adjusted the brown grille fabric and reinforced the wooden grille frames.
Driver Mounting & Seals: We inspected the driver mounting, gaskets, and associated hardware.
After Restoration / Final Testing
Driver Operation: We checked sound output from the low-frequency and high-frequency sections following service.
Woofer Movement: We checked low-frequency cone movement after the voice-coil and suspension work.
Controls & Crossovers: We tested control adjustment and crossover operation during final functional checks.
Listening & Frequency Sweep: We completed music playback and speaker frequency-sweep checks.
Burn-In: We completed the HQaudios speaker burn-in procedure.
Reviews
There are no reviews yet.