JBL 4344 4-Way Studio Monitor Speakers Pair Restored 1-Year Warranty

$12,999

-

  • JBL 4344 classic four-way professional studio monitor pair
  • 15-inch JBL 2235H low-frequency system design
  • 10-inch JBL 2122H mid-bass system design
  • Horn-loaded compression-driver section with JBL 2307 horn and 2308 acoustic lens
  • JBL slot-type ultra-high-frequency section
  • 35 Hz – 20 kHz factory frequency response; 8-ohm nominal impedance
  • Front-panel level controls and internal / external crossover selection
  • Walnut veneer cabinets with classic blue front baffles
  • Two blue fabric grille assemblies included – packed in a separate box for shipping
  • Professionally serviced, detailed and quality-checked by HQaudios
  • Backed by our 1-Year HQaudios Warranty
SKU: 2CC0030 - VS24 Category:

JBL 4344 Studio Monitor Speaker Pair – Web 15 Percent Larger Text

JBL 4344 4-Way Professional Studio Monitor Speaker Pair
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
JBL 4344 four-way professional studio monitor design.
Large-format 15-inch low-frequency and 10-inch mid-bass driver sections.
Horn-loaded high-frequency section with acoustic lens and dedicated ultra-high-frequency driver.
Mirror-image stereo monitor architecture with front-panel level adjustments.
Cabinets and driver systems professionally inspected and serviced by HQaudios.

PRODUCT OVERVIEW
The JBL 4344 is a large-format four-way professional studio monitor from JBL’s 43-series. Its bass-reflex system combines a dedicated woofer, mid-bass cone driver, horn-loaded high-frequency section, and ultra-high-frequency transducer. JBL designed the 4344 as a vertical, mirror-imaged stereo monitor pair for controlled imaging and full-range reproduction.
The design offers front-panel level controls and rear-panel provisions for internal passive-network or external crossover operation. Its traditional walnut-tone cabinetry and blue front-baffle presentation are characteristic of this monitor series.

HQAUDIOS RESTORATION & TESTING
Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
Before Restoration
Initial inspection identified scratching and wear on the cabinet exteriors, dust inside the cabinets, surface wear on identification areas, dirty controls, and oxidation at the rear speaker terminals. The level controls also showed scratchy operation during adjustment.
The grilles showed frame or fabric damage during incoming inspection. Woofer edges, high-frequency diaphragms, and crossover assemblies were also identified for technical inspection.
During Restoration
Driver Inspection: We tested each driver and measured its DC resistance as part of the four-way system inspection.
Woofer Surrounds: We inspected the foam surrounds, cone movement, and mounting edges and serviced the woofer assemblies.
Horn & Compression Drivers: We inspected and tested the high-frequency diaphragm assemblies and horn sections.
Midrange & Ultra-High-Frequency Drivers: We inspected the mid-bass and ultra-high-frequency units and checked their output.
Crossover Networks: We inspected and measured crossover components; out-of-spec capacitors were replaced.
L-Pad Level Controls: We cleaned and serviced the front-panel level controls to address scratchy adjustment.
Cabinet Restoration: We repaired and refinished the cabinet surfaces, including the exterior areas identified during inspection.
Cabinet Interior: We cleaned interior dust and inspected the internal damping materials and accessible connections.
Grille Service: We cleaned and restored the grille assemblies, including the frames, fabric, and attachment areas.
Terminals & Wiring: We cleaned the rear speaker terminals and inspected internal wiring and connection points.
Mounting Gaskets & Hardware: We checked driver mounting, fasteners, and cabinet seals.
Controls, Badges & Labels: We cleaned the adjustment knobs and detailed the accessible identification and trim surfaces.
After Restoration / Final Testing
Burn-In: We completed the HQaudios speaker burn-in procedure to evaluate operating stability.
Frequency Sweep: Each speaker was checked across the operating range for audible output from the driver sections.
Listening Test: The pair underwent music-playback listening checks following service.

CONDITION
Technical Condition
Four-Way Driver System: The low-frequency, mid-bass, horn-loaded and ultra-high-frequency sections were included in post-service playback and frequency-sweep evaluation.
L-Pad Level Controls: The front-panel adjustments were serviced and included in the functional inspection.
Crossover & Connections: The internal passive networks and rear terminal connections were included in the service inspection.
Operating Configuration: Front-panel level adjustment and passive-network / external crossover selection are part of the JBL 4344 system design.
Cosmetic Condition
Cabinets: Traditional wood-grain presentation with refinished exterior surfaces. The pre-service inspection documented scratches, including wear around the lower cabinet areas.
Front Baffles: Classic blue front baffles with the JBL four-way driver and control layout.
Drivers & Horn Lenses: The driver faces and black acoustic-lens assemblies retain the familiar JBL 4344 appearance.
Grilles: The grille frames and fabric were included in the cosmetic service process.
Controls & Identification: Knobs, badges, and identification surfaces were cleaned and detailed.
Rear Panels: Speaker terminals and network-selection areas were inspected and cleaned.
Driver, Crossover & Connection Inspection Completed
Post-Service Speaker Testing Completed

SPECIFICATIONS
Brand: JBL
Model: 4344
Type: 4-Way Professional Studio Monitor Speaker Pair
Configuration: 4-Way, 4-Driver; Bass Reflex
Factory Low-Frequency Driver: 15-inch cone woofer
Factory Mid-Bass Driver: 10-inch cone driver
High-Frequency System: Horn-loaded compression driver with acoustic lens
Ultra-High-Frequency System: Slot-type high-frequency transducer
Factory Frequency Response: 35 Hz – 20 kHz (±3 dB)
Nominal Impedance: 8 Ohms
Factory Sensitivity: 93 dB / 1 W / 1 m (500 Hz – 2.5 kHz average)
Factory Passive-Network Power Handling: 120 W RMS (JBL catalog rating)
Factory Crossover Frequencies: 320 Hz / 1.3 kHz / 10 kHz
Factory Dimensions: 25.0 W x 41.4 H x 17.1 D in – each speaker

WHAT IS INCLUDED
1 Pair of JBL 4344 Professional Studio Monitor Speakers
Only the items specifically listed above are included.
Speaker stands shown in the photos are for display purposes only and are not included in the listed price. Please contact HQaudios if you would like to purchase the speakers with stands; discounted combo pricing may be available.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.

HQaudios Professional Shipping and Packaging

Please contact us before purchase for the most current availability information.
1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Warranty. Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.
MORE FROM HQAUDIOS
Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

HQaudios Vintage Audio Repair and Restoration
HQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “JBL 4344 4-Way Studio Monitor Speakers Pair Restored 1-Year Warranty”

Recently viewed

You have not viewed any products yet.