Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
When we received this Sansui QRX-7001, the power supply, power amplifier, and four-channel circuitry required component-level service. Noise was also identified at the volume switch.
During Restoration
Capacitors: We tested and measured the capacitors; out-of-spec units were replaced with quality, correct-value components:
220 µF / 25 V ×5, 1,000 µF / 100 V ×10, 1 µF / 50 V ×10, 470 µF / 35 V ×1, 47 µF / 16 V ×10, 100 µF / 16 V ×10, and 10 µF / 63 V ×10.
Resistors: We replaced 10 Ω / 1/2 W ×10, 150 Ω ×10, and 4.7 Ω ×10.
Transistors: We replaced 2SC1111 ×4, 2SC1115 ×4, and A1015 ×20 plus ×10.
Transistor Insulators: We installed 10 replacement transistor insulating pads.
Power Supply: We serviced the power-supply section and completed the documented component replacements.
Power Amplifier: We serviced and recapped the power-amplifier section and completed the transistor replacement work.
Volume Switch: We serviced the volume switch to correct the noise identified during the initial assessment.
Four-Channel Circuitry: We recapped the four-channel circuit section.
Circuit Boards: We thoroughly cleaned and inspected the circuit boards and reinforced weak solder joints.
Bias & DC Offset: We measured and adjusted both to Sansui’s original factory specifications.
Lighting: We replaced the dial and meter lamps with new lighting components.
Switches, Controls & Input/Output Jacks: We cleaned and serviced the switches and controls and inspected and cleaned the signal connections.
FM Tuner & Phono Stage: We checked and serviced the FM tuner section and tested the phono stage for proper gain and channel balance.
After Restoration / Final Testing
A 72-hour burn-in test was completed to verify performance and stability.
All inputs, outputs, tone controls, and speaker A/B switching were tested.
Receiver power-up, front-panel operation, and audio playback were checked during final functional testing.
Reviews
There are no reviews yet.