Sansui QRX-9001 Vintage Quadraphonic Receiver – Professionally Restored – 1-Year Warranty

$3,499

-

  • Flagship Sansui quadraphonic receiver
  • 120W per channel into 8 ohms in two-channel POWER x2 mode
  • 60W per channel into 8 ohms with all four channels driven
  • QS Vario-Matrix, SQ, CD-4 / Direct, Hall, Surround, and synthesized four-channel modes
  • Dual phono inputs and multiple tape connections
  • Built-in FM and AM tuner
  • Direct-reading analog power meters
  • Affected amplifier channel serviced to correct distortion
  • Aging or defective transistors and capacitors replaced where required
  • Controls, switches, dial, and meter illumination serviced
  • Backed by our 1-Year HQaudios Warranty

1 in stock

Sansui QRX-9001 Vintage Quadraphonic Receiver – Professionally Restored – 1-Year Warranty

Professionally Restored by HQaudios – Backed by Our 1-Year Warranty.

Overview

This listing is for a Sansui QRX-9001 quadraphonic receiver, professionally inspected, serviced, restored, and tested by HQaudios.

Produced during the late 1970s, the QRX-9001 represents one of Sansui’s most advanced four-channel receiver designs. It combines high-power stereo and quadraphonic amplification with QS Vario-Matrix processing, SQ and CD-4 compatibility, extensive source routing, Dolby circuitry, and a substantial chassis designed for complex multi-speaker systems.

This unit was serviced to address scratchy controls, weak illumination, and distortion previously identified in one channel. Aging or defective components were replaced where required, and the receiver was tested across its primary inputs, outputs, tuner, stereo, and quadraphonic functions.

  • Condition: Excellent – Professionally Restored
  • Included: Receiver only; no original box or additional accessories

Key Highlights

  • Flagship Sansui quadraphonic receiver
  • 120W per channel into 8 ohms in two-channel POWER x2 mode
  • 60W per channel into 8 ohms with all four channels driven
  • QS Vario-Matrix, SQ, CD-4 / Direct, Hall, Surround, and synthesized four-channel modes
  • Dual phono inputs and multiple tape connections
  • Built-in FM and AM tuner
  • Direct-reading analog power meters
  • Affected amplifier channel serviced to correct distortion
  • Aging or defective transistors and capacitors replaced where required
  • Controls, switches, dial, and meter illumination serviced
  • Backed by our 1-Year HQaudios Warranty

Basic Specifications

BrandSansui
ModelQRX-9001
SKU15QTTVE0007
Type4-Channel / 2-Channel Quadraphonic AM/FM Receiver
Production Period1978-1979
Tuning RangeFM and AM / MW
Four-Channel Power Output60W per channel into 8 ohms, all four channels driven, 20Hz-20kHz, no more than 0.3% THD
Four-Channel Output at 1kHz65W per channel into 8 ohms, all four channels driven, no more than 0.3% THD
Two-Channel Power Output120W per channel into 8 ohms, both channels driven, 20Hz-20kHz, no more than 0.3% THD, 2-CH A POWER x2 mode
Two-Channel Output at 1kHz140W per channel into 8 ohms, both channels driven, no more than 0.3% THD, 2-CH A POWER x2 mode
Power Bandwidth20Hz-20kHz at rated minimum RMS output
Frequency Response20Hz-30kHz, +1dB at 1 watt
Total Harmonic DistortionLess than 0.3% at or below rated minimum RMS output
Intermodulation DistortionLess than 0.3%
Damping FactorApproximately 30 at 8 ohms
Phono Input2.5mV / 50k ohms
Tape Play / AUX Input100mV / 50k ohms
Tape Recording Output100mV via pin jacks; 30mV via DIN
Signal-to-Noise RatioBetter than 70dB phono; better than 80dB tape play / AUX
Channel SeparationBetter than 45dB for phono and tape play / AUX at rated output, 1kHz
Speaker Load Impedance4 or 8 ohms in 2-CH A, 4-CH A, or 4-CH B modes; 8 ohms in 2-CH A POWER x2 and 4-CH A+B modes
Quadraphonic FormatsQS Vario-Matrix, SQ, CD-4 / 4-Channel Direct, Hall, Surround, and synthesized 4-channel reproduction
Power Requirements100, 120, 220, or 240V AC, 50/60Hz depending on market version; U.S./Canada version 120V, 60Hz
Maximum Power Consumption860 watts
Rated Power Consumption580 watts / 675VA
Dimensions600 x 174 x 415mm – W x H x D
Dimensions in InchesApproximately 23.6 x 6.9 x 16.3 inches – W x H x D
WeightApproximately 23.0kg / 50.7 lbs net
Made InJapan
IncludedReceiver only; no original box or additional accessories unless specifically shown and stated

Specification note: Power, load-impedance, voltage, and consumption figures vary by operating mode and market version. Confirm the rear voltage label before connecting the receiver to power

Sound Character

The Sansui QRX-9001 delivers the powerful, full-bodied, and engaging presentation associated with Sansui’s larger receivers.

In two-channel mode, it provides strong bass control, a rich midrange, and a smooth high-frequency presentation. In four-channel operation, compatible sources and matrix processing can create a spacious and immersive sound field.

It is especially well suited to classic rock, jazz, orchestral music, live recordings, quadraphonic vinyl, reel-to-reel playback, and large vintage speaker systems.

HQaudios Restoration & Testing Process

Before Restoration

  • The receiver was inspected for overall electronic, cosmetic, tuner, amplifier, and quadraphonic operation.
  • Scratchy and intermittent behavior was identified in several controls.
  • Dial illumination was found to be dim.
  • Distortion was detected in one amplifier channel.
  • All stereo and four-channel amplifier sections were checked for output.
  • FM and AM tuner operation was evaluated.
  • Phono, AUX, tape, and multichannel inputs were inspected.
  • Analog meters, lamps, switches, knobs, speaker selectors, and rear connections were checked.
  • Internal circuit boards were inspected for aging components, heat stress, oxidized contacts, and questionable solder joints.
  • The walnut-veneer cabinet, aluminum faceplate, knobs, meters, feet, AM antenna, and power cord were inspected.

During Restoration

  • The affected amplifier channel was diagnosed and serviced to correct the distortion issue.
  • Aging or defective transistors associated with the affected circuitry were replaced where required.
  • Questionable or out-of-spec capacitors were replaced selectively.
  • Power-supply sections were inspected for stable voltage delivery.
  • Amplifier bias and DC offset were checked and adjusted where required.
  • Scratchy switches and potentiometers were cleaned and treated.
  • Input selectors, tape-monitor switches, mode controls, speaker selectors, and quadraphonic controls were serviced.
  • Dial and meter illumination circuits were inspected and serviced.
  • Internal circuit boards, chassis areas, wiring, connectors, and solder joints were cleaned and inspected.
  • Phono, line-level, tuner, tape, stereo, and quadraphonic signal paths were checked.
  • The faceplate, knobs, switches, dial area, cabinet, and exterior surfaces were carefully cleaned.
  • The original cosmetic character and circuit design were preserved throughout the service.

After Restoration

  • Two-channel output was tested through the front left and right amplifier channels.
  • Four-channel output was tested through all four amplifier channels.
  • Channel balance and output consistency were verified.
  • The previously distorted channel was checked for clean and stable operation.
  • FM and AM tuner operation was tested.
  • Phono, AUX, tape-monitor, and available multichannel inputs were tested.
  • Speaker outputs and headphone operation were checked.
  • Analog meters and illumination were verified.
  • QS, SQ, CD-4 / Direct, synthesized quad, stereo, Hall, and Surround modes were checked where suitable sources and test conditions were available.
  • Controls and switches were tested for smooth, quiet operation.
  • Extended bench testing and real-world listening tests were completed.
  • The receiver passed HQaudios final inspection and is prepared for regular home use.

Cosmetic Condition

This Sansui QRX-9001 is in Excellent vintage cosmetic condition.

The brushed aluminum faceplate presents well, with a bright and clear dial area. The knobs, switches, analog meters, feet, attached AM antenna, and AC power cord are present and intact where shown.

The walnut-veneer cabinet may show minor marks, light scratches, edge wear, or other signs consistent with age and previous use.

The original manual and factory box are not included. Please review all photos carefully, as they form part of the product description.

What Is Included

  • Sansui QRX-9001 quadraphonic receiver
  • Attached AC power cord
  • Attached AM antenna, where shown

The original box, printed owner’s manual, speakers, audio cables, media, and other accessories are not included unless specifically shown and stated.

Suggested Pairing

Four-Speaker JBL System

Front: JBL L100 Century or JBL 4311
Rear: JBL L26 or JBL L36

This configuration emphasizes dynamics, projection, and the powerful presentation of the QRX-9001.

Four-Speaker Wharfedale System

Front and Rear: Wharfedale W70 or similarly efficient vintage Wharfedale models

Classic Wharfedale speakers can add warmth and a smooth, room-filling quadraphonic presentation.

Four-Speaker Acoustic Research System

Front and Rear: AR-2ax or other properly matched AR models

This pairing can provide balanced tonality, good imaging, and controlled bass.

Four-Speaker KLH System

Front and Rear: KLH Model Five or Model Six

KLH speakers provide a full, natural presentation suitable for vocals and vintage quadraphonic recordings.

Two-Channel Stereo System

Speakers: JBL 4311, Klipsch Heresy, Sansui SP-X Series, or Yamaha NS-1000

In stereo mode, the QRX-9001 can serve as a powerful conventional receiver with strong scale and control.

Turntable and Source Pairing

  • Dual 1229
  • Technics SL-1200
  • Thorens TD-160
  • CD-4 compatible turntable and cartridge system
  • SQ or QS encoded vinyl
  • Four-channel reel-to-reel deck
  • Modern DAC or streamer connected through AUX

Authentic CD-4 playback requires a suitable CD-4 cartridge, stylus, cabling, and properly encoded record.

Trade-In Welcome

HQaudios may accept vintage receivers, amplifiers, speakers, cassette decks, reel-to-reel decks, turntables, and other classic audio equipment as trade-ins.

Please provide clear photos, model information, operating condition, cosmetic condition, and any known service history for evaluation.

Combo Discount

Save $100 when purchasing this receiver together with an eligible restored vintage audio component from HQaudios.

Video Test Available

A video demonstrating stereo playback, four-channel output, tuner operation, analog meters, illumination, and general functionality can be provided upon request.

Additional photos of the faceplate, cabinet, meters, rear connections, internal chassis, and cosmetic condition may also be available.

Shipping

The Sansui QRX-9001 is a large and heavy receiver that requires specialized packing.

  • Protective surface wrapping
  • Dense internal cushioning
  • Reinforced corner protection
  • Heavy-duty inner and outer cartons
  • Additional faceplate and cabinet protection
  • Plastic strapping and handling labels
  • Tracking and insurance where available

Local pickup may be available by appointment in Garden Grove, California.

1-Year HQaudios Warranty

This Sansui QRX-9001 is backed by our 1-Year HQaudios Warranty covering proper electronic and functional operation under normal home use.

The warranty does not cover misuse, incorrect speaker wiring, unsuitable speaker loads, physical or cosmetic damage, unauthorized repair, incorrect voltage, moisture, heat, impact, defective external equipment, or normal maintenance.

Please contact HQaudios for technical support before arranging a return or repair.

Returns & Buyer Support

HQaudios provides support for stereo and quadraphonic speaker setup, source connections, operating modes, tuner use, and basic troubleshooting.

Please contact us first if assistance is required after delivery. The receiver must not be opened, modified, or repaired by an unauthorized technician during the warranty period.

Important Vintage Audio Note

The QRX-9001 is a complex vintage receiver containing multiple amplifier channels, matrix-decoding circuits, tuner sections, Dolby circuitry, control assemblies, and numerous mechanical switches.

Correct speaker placement, wiring, source selection, operating-mode selection, and speaker impedance are essential for proper stereo and quadraphonic performance.

Always power the receiver off before connecting or disconnecting speakers. Use the load impedance specified for the selected speaker/mode setting.

Because the receiver weighs approximately 50.7 lbs, two-person handling is recommended.

Why Buy From HQaudios?

  • Professionally restored vintage receiver
  • Two-channel and four-channel operation checked
  • Distorted amplifier channel repaired
  • Aging or defective transistors replaced where required
  • Questionable capacitors replaced selectively
  • Controls and switches cleaned
  • Dial and meter illumination serviced
  • Inputs, outputs, tuner, meters, and amplifier functions tested
  • Model-specific specifications verified against Sansui service documentation
  • Protective packaging for a large and heavy receiver
  • Technical support before and after purchase
  • Trade-in options for eligible vintage equipment
  • Backed by our 1-Year HQaudios Warranty

HQaudios – Vintage Audio Restored with Care.

Professionally Restored – Carefully Packed – 1-Year Warranty.

Reviews

There are no reviews yet.

Be the first to review “Sansui QRX-9001 Vintage Quadraphonic Receiver – Professionally Restored – 1-Year Warranty”

Recently viewed

You have not viewed any products yet.