Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
The cabinets showed scratches and impact marks, interior dust, worn identification surfaces and dirt at the speaker terminals. The front grille fabric and wooden frames also required attention.
The incoming assessment also identified bass/midrange voice-coil rubbing, aged suspension and diaphragm materials, and issues involving the level control, crossover and speaker connections.
During Restoration
Driver Measurements & Sound Test: We inspected the drivers, measured their DC resistance and tested the speaker functions and sound output.
Bass Voice-Coil Repair: We corrected the bass/midrange voice-coil rubbing and checked the movement of the cone.
Bass Driver Components: We replaced the deteriorated surround, edge materials and dust cap, then cleaned the cone surface.
Midrange-Related Repair: We replaced the cap, suspension and diaphragm materials specified for the MID-frequency repair work on the bass/midrange section.
Treble Driver Components: We replaced the cap, suspension and diaphragm materials specified for the high-frequency driver service.
Crossover & Capacitors: We repaired the crossover fault, inspected and measured the network components and replaced out-of-spec capacitors with correctly specified parts.
L-Pad / Level Control: We cleaned and repaired the level-control contacts, checked adjustment operation and removed accumulated dust.
Terminals, Jacks & Wiring: We inspected and cleaned the speaker terminals, measured the jack/wiring connections and checked the internal electrical contacts.
Cabinet Veneer & PU Finish: We repaired scratched areas, restored the veneer and refinished the cabinet surfaces with PU coating.
Cabinet Interior Cleaning: We removed dust and cleaned accessible crossover boards, internal surfaces and driver areas.
Badges & Identification: We remade the logo details, cleaned the badge surfaces and checked their mounting.
Grille Fabric & Frames: We re-tensioned the grille fabric and reinforced the wooden grille frames.
Driver Mounting & Adhesives: We reinforced the affected driver joints with adhesive and checked the mounting hardware and gaskets.
Controls & Finishing: We cleaned the control hardware and inspected the restored cabinet and grille assemblies.
After Restoration / Final Testing
Woofer Mechanical Check: We confirmed that the bass/midrange cone moved freely without audible voice-coil rubbing during playback testing.
Driver & Crossover Playback: We checked the bass/midrange and treble sections after component repair and crossover servicing.
Frequency Sweep & Stereo Listening: We checked each speaker across its operating range and evaluated the pair together with music playback.
Burn-In & Final Inspection: The pair completed the HQaudios burn-in process and a final functional and cabinet-assembly review.
Reviews
There are no reviews yet.