Tannoy D100 6.5 Inch Dual Concentric Speakers – Rosewood – Professionally Restored – 1-Year Warranty

$1,999

-

  • Tannoy D100 British 2-way stand-mount loudspeaker pair from the renowned Definition series
  • 6.5-inch Dual Concentric driver (Type 1666) integrating bass/midrange and high-frequency reproduction on a shared acoustic axis
  • 45 Hz – 20 kHz frequency response with 88.5 dB sensitivity, 8-ohm nominal impedance and a 2 kHz crossover
  • Rosewood-finish bass-reflex cabinets with rear ports, removable black front grilles and gold-tone Tannoy badges
  • Original Dual Concentric architecture designed for coherent stereo imaging and consistent high- and low-frequency dispersion
  • HQaudios restoration focus on cabinet surfaces, driver surrounds, crossover circuitry, grille assemblies and speaker connections
  • Backed by our 1-Year HQaudios Warranty

1 in stock

SKU: 12DT0001 - VS24 Categories: ,

SOUND DEMO / AUDIO EXPERIENCE

Tannoy Definition D100 Sound Demo

For the best audio experience, please use headphones or external speakers.

Tannoy Definition D100 6.5-Inch Dual Concentric Speaker Pair
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
Definition D100: Classic Tannoy stand-mount loudspeaker design for a dedicated two-channel listening system.
Dual Concentric sound: A shared acoustic axis for bass/midrange and high-frequency reproduction.
Driver service: Attention to reported voice-coil rubbing and deterioration of driver suspension and cone areas.
Cabinet refurbishment: Veneer repairs and polyurethane finishing to address age-related surface deterioration.
Grille and terminal detailing: Service attention to the grille frames and speaker connections.

PRODUCT OVERVIEW
The Tannoy Definition D100 is a passive British stand-mount loudspeaker featuring Tannoy’s Dual Concentric architecture, with the high-frequency unit located on the same acoustic axis as the bass/midrange driver.
This compact design was developed for coherent stereo imaging in traditional two-channel listening systems.

HQAUDIOS RESTORATION & TESTING
Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.

Before Restoration
The cabinets showed scratches and impact marks, interior dust, worn identification surfaces and dirt at the speaker terminals. The front grille fabric and wooden frames also required attention.
The incoming assessment also identified bass/midrange voice-coil rubbing, aged suspension and diaphragm materials, and issues involving the level control, crossover and speaker connections.

During Restoration
Driver Measurements & Sound Test: We inspected the drivers, measured their DC resistance and tested the speaker functions and sound output.
Bass Voice-Coil Repair: We corrected the bass/midrange voice-coil rubbing and checked the movement of the cone.
Bass Driver Components: We replaced the deteriorated surround, edge materials and dust cap, then cleaned the cone surface.
Midrange-Related Repair: We replaced the cap, suspension and diaphragm materials specified for the MID-frequency repair work on the bass/midrange section.
Treble Driver Components: We replaced the cap, suspension and diaphragm materials specified for the high-frequency driver service.
Crossover & Capacitors: We repaired the crossover fault, inspected and measured the network components and replaced out-of-spec capacitors with correctly specified parts.
L-Pad / Level Control: We cleaned and repaired the level-control contacts, checked adjustment operation and removed accumulated dust.
Terminals, Jacks & Wiring: We inspected and cleaned the speaker terminals, measured the jack/wiring connections and checked the internal electrical contacts.
Cabinet Veneer & PU Finish: We repaired scratched areas, restored the veneer and refinished the cabinet surfaces with PU coating.
Cabinet Interior Cleaning: We removed dust and cleaned accessible crossover boards, internal surfaces and driver areas.
Badges & Identification: We remade the logo details, cleaned the badge surfaces and checked their mounting.
Grille Fabric & Frames: We re-tensioned the grille fabric and reinforced the wooden grille frames.
Driver Mounting & Adhesives: We reinforced the affected driver joints with adhesive and checked the mounting hardware and gaskets.
Controls & Finishing: We cleaned the control hardware and inspected the restored cabinet and grille assemblies.

After Restoration / Final Testing
Woofer Mechanical Check: We confirmed that the bass/midrange cone moved freely without audible voice-coil rubbing during playback testing.
Driver & Crossover Playback: We checked the bass/midrange and treble sections after component repair and crossover servicing.
Frequency Sweep & Stereo Listening: We checked each speaker across its operating range and evaluated the pair together with music playback.
Burn-In & Final Inspection: The pair completed the HQaudios burn-in process and a final functional and cabinet-assembly review.

CONDITION

Technical Condition
Driver Sections: Serviced and included in the final speaker-output checks.
Crossover: Serviced and checked during the final functional evaluation.
Speaker Connections: Inspected and included in the completed functional check.

Cosmetic Condition
Cabinets: Cabinet edges and surface areas received veneer repairs and a renewed polyurethane finish.
Grille Assemblies: Grille fabric was re-tensioned and the wood frames reinforced.
Badges: Refreshed as part of the exterior detailing; the finished appearance should be evaluated using the actual listing photographs.
Overall Presentation: Professionally refurbished vintage speaker cabinets. Please review the final product photos for exact surface details and remaining wear.

Speaker Service and Final Acoustic Checks Completed
Cabinet and Grille Refurbishment Completed

SPECIFICATIONS
Brand: Tannoy
Model: Definition D100
Type: Passive Stand-Mount Loudspeaker
Configuration: Dual Concentric, 2-way design
Low-/High-Frequency Assembly: 6.5-inch Dual Concentric

WHAT IS INCLUDED
1 pair (2) Tannoy Definition D100 speakers
Only the items specifically listed above are included. Speaker stands shown in the photos are for display purposes only and are not included in the listed price. Please contact HQaudios if you would like to purchase the speakers with stands; discounted combo pricing may be available.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.
HQaudios Professional Shipping and Packaging
Please contact us before purchase for the most current availability information.

1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Warranty. Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.

MORE FROM HQAUDIOS
Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

HQaudios Vintage Audio Repair and Restoration

HQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “Tannoy D100 6.5 Inch Dual Concentric Speakers – Rosewood – Professionally Restored – 1-Year Warranty”

Recently viewed

You have not viewed any products yet.