Pioneer HPM-100 4-Way Speakers Pair – Walnut – Restored – 1-Year Warranty

$3,899

-

  • Pioneer HPM-100 – Pioneer’s legendary 4-way High Polymer Molecular speaker (1976–1979)
  • 12-inch carbon-fiber blended cone woofer
  • 4-inch cone midrange and 1.75-inch cone tweeter
  • HPM polymer-film super tweeter for airy, extended highs
  • Front-panel midrange and high-frequency level controls
  • All original Pioneer drivers – cones and diaphragms in good condition
  • New surrounds and gaskets on all cone drivers; level controls repaired
  • Cabinets re-veneered and finished in walnut PU; new badges, logos and grille cloth
  • Professionally inspected, restored and tested by HQaudios
  • Backed by our 1-Year HQaudios Seller Warranty
SKU: 2QE0245 - VS24 Categories: , ,

Pioneer HPM-100 4-Way Speaker Pair – Walnut Finish – Restored – 1-Year Warranty
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
Classic Pioneer HPM-100: Four-way, four-driver vintage stereo loudspeaker pair.
12-Inch Carbon-Fiber-Blend Woofer: Large-format low-frequency driver in a bass-reflex cabinet.
Dedicated Midrange and Cone Tweeter: Separate driver sections for the vocal and high-frequency bands.
HPM Film Super Tweeter: Pioneer’s High Polymer Molecular high-frequency technology.
Front-Panel Level Controls: Separate adjustment for midrange and high-frequency output.
Walnut-Tone Cabinet Presentation: Refinished veneer, black baffles and black fabric grilles.

PRODUCT OVERVIEW
The Pioneer HPM-100 is a celebrated Japanese vintage loudspeaker from Pioneer’s High Polymer Molecular series. Its four-way bass-reflex design combines a carbon-fiber-blend woofer, a cone midrange, a cone tweeter and an HPM film super tweeter.
The separate driver sections and front-mounted midrange and high-frequency level controls allow the system to deliver a broad tonal presentation with adjustment for the listening room.
The classic HPM-100 design is well suited to enthusiasts building a two-channel vintage stereo system around Pioneer or other compatible amplification.

HQAUDIOS RESTORATION & TESTING
Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
Before Restoration
The cabinets had heavy scratches and worn exterior surfaces, with accumulated dust and dirt inside. The identification labels and logos had scratched or deteriorated finishes, and the speaker terminals showed oxidation and dirt.
The front control knobs were dusty, and the level controls produced crackling during inspection. Aging suspension, edge and diaphragm materials on the cone drivers, together with grille-frame and crossover areas, required technical attention.

During Restoration
Driver Measurements: We tested the driver sections and measured their DC resistance to assess electrical operation.
Woofer Surrounds & Mountings: We replaced the worn surrounds and edge materials, cleaned the affected driver areas and reinforced mounting and adhesive joints.
Midrange & Cone Tweeter Components: We serviced the aging suspension and diaphragm/cone materials and renewed the dust caps and surrounds identified during the technical inspection.
HPM Super Tweeters: We inspected the film super-tweeter sections and checked their high-frequency output without altering their film construction.
L-Pad Level Controls: We repaired the crackling midrange and high-frequency controls, cleaned their contacts and rechecked adjustment operation.
Capacitors & Crossover: We inspected and measured the crossover components; out-of-spec capacitors were replaced with correctly specified parts.
Speaker Terminals & Wiring: We cleaned oxidized input terminals and checked accessible wiring, contacts and connections.
Cabinet Veneer & PU Finish: We repaired and re-veneered the worn surfaces, then refinished the cabinets in a walnut-tone PU coating.
Cabinet Interior Cleaning: We removed accumulated dirt and dust from the accessible cabinet interiors, crossover areas and driver mountings.
Labels & Logos: We replaced the worn identification labels and front logos with newly prepared details.
Controls & Knobs: We cleaned dusty knobs and accessible front-panel hardware.
Grille Fabric & Frames: We fitted new grille cloth and reinforced the affected wooden frames with adhesive.
Driver Gaskets & Hardware: We checked the driver seals, gaskets, fastening points and mounting interfaces.

After Restoration / Final Testing
Driver Playback: We checked the woofer, midrange, cone tweeter and HPM super-tweeter output following service.
Level-Control Retest: We checked midrange and high-frequency adjustment through their operating ranges after repair.
Phase & Frequency Sweep: We checked driver polarity and performed frequency-sweep and stereo listening tests.
Burn-In & Listening: The pair completed operational burn-in and listening evaluation as part of the HQaudios final testing process.

CONDITION
Technical Condition
System: Four-way passive loudspeaker pair with independent midrange and high-frequency adjustment controls.
Playback: All four driver sections are represented in the functional and listening checks.
Connections: Wired speaker terminals for connection to a compatible amplifier or receiver.

Cosmetic Condition
Cabinets: Walnut-tone veneer and PU-lacquer exterior finish with black front baffles.
Badges & Labels: Replacement identification details fitted as part of the refurbishment.
Grilles: Black fabric coverings on reinforced wooden frames.
Remaining Vintage Wear: Please examine the actual product photographs for the cabinet corners, driver trim, control panels and grille fit.
QC Summary: Professionally serviced speaker pair with restored cabinet and grille presentation.

SPECIFICATIONS
Brand: Pioneer
Model: HPM-100
Type: Four-Way, Four-Driver Passive Loudspeaker
Enclosure: Bass-Reflex / Bookshelf-Style
Factory Woofer: 12-Inch Carbon-Fiber-Blend Cone
Factory Midrange: 4-Inch Cone
Factory Tweeter: 1-3/4-Inch Cone
Factory Super Tweeter: High Polymer Molecular Film
Nominal Impedance: 8 Ohms
Factory Frequency Range: 30 Hz – 25,000 Hz
Factory Sensitivity: 92.5 dB/W at 1 Meter
Factory Nominal Input Power (100 W Version): 50 Watts
Factory Maximum Input Power (100 W Version): 100 Watts
Factory Crossover Frequencies (Pioneer Brochure): 1,200 Hz / 4,000 Hz / 12,000 Hz
Factory Cabinet Dimensions (Each): 15-3/8 W x 26-3/8 H x 15-1/2 D Inches
Factory Weight (Each): 58 lb 14 oz
Finish of This Pair: Walnut-Tone Veneer and PU Lacquer

WHAT IS INCLUDED
1 Stereo Pair (2 Speakers) of Pioneer HPM-100 Loudspeakers
2 Black Front Grille Assemblies
Only the items specifically listed above are included.
Speaker stands, separate bases, cables and accessories are not included. Please contact HQaudios for available stand options and package pricing.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight and construction. Large or heavy items may be palletized and shipped by freight for safer transportation.

HQaudios Professional Shipping and Packaging

Please contact us before purchase for the most current availability information.

1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Warranty. Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility or your order, please contact HQaudios for assistance.

MORE FROM HQAUDIOS
Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

HQaudios Vintage Audio Repair and Restoration

HQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “Pioneer HPM-100 4-Way Speakers Pair – Walnut – Restored – 1-Year Warranty”

Recently viewed

You have not viewed any products yet.