Before Restoration
We evaluated this JBL L3 speaker pair with attention to the condition of its electronic components and loudspeaker assemblies.
Crossover Networks: We inspected the crossover circuitry and evaluated capacitor aging and electrical characteristics.
Capacitors: We checked capacitance values, component condition, and signs of age-related deterioration.
Speaker Drivers: We inspected the low-frequency and high-frequency driver sections and their accessible connections.
Connections: We inspected the speaker terminals, wiring connections, and accessible electrical contact points.
Cabinet Assemblies: We examined the cabinet construction and accessible mounting components as part of the service inspection.
During Restoration
We performed the approved HQaudios service procedures for this JBL L3 pair, focusing on the crossover circuitry, component condition, and electrical connections.
Capacitor Inspection & Replacement:
Our technicians measured the applicable crossover capacitors and evaluated their capacitance, ESR, leakage, and physical condition. Deteriorated capacitors with capacitance deviations exceeding 5% from nominal were replaced with suitable components selected for the circuit’s electrical requirements.
Crossover Network Service:
We inspected the crossover boards and associated components, checked accessible electrical connections, and serviced the affected areas.
Component Inspection:
We examined accessible resistors, wiring, and related components for visible damage or deterioration.
Internal Cleaning:
We cleaned accessible interior service areas and removed accumulated dust from the serviced components.
Contacts & Connections:
We inspected and cleaned accessible electrical contacts and speaker connection points.
Solder Joint Inspection:
We inspected the accessible solder connections in the serviced sections for signs of deterioration.
Driver Inspection:
We examined the woofer and tweeter assemblies, including accessible wiring and mounting areas.
Mechanical Inspection:
We reviewed accessible mounting hardware and cabinet-related components during the service process.
Exterior Cleaning:
We cleaned accessible exterior surfaces using methods appropriate for the cabinet finish and speaker components.
After Restoration / Final Testing
Following the service work, we carried out follow-up inspection of the serviced crossover circuitry and associated electrical connections.
Replacement Capacitors:
We reviewed the installation and electrical suitability of the replacement components.
Crossover Connections:
We inspected the serviced connection points for correct assembly and electrical contact.
Driver Connections:
We reviewed the accessible woofer and tweeter wiring connections.
Final Inspection:
We completed a post-service inspection of the areas addressed during restoration.
Reviews
There are no reviews yet.