Before Restoration
The Acoustic Research MGC-1 pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance. The crossover networks were examined for bulging or leaking capacitors, each capacitor was measured against its original value (within 10% tolerance), and the level controls, wiring and terminals were inspected.
Inspection Findings: The surrounds of the speakers had deteriorated, and the surrounds of several woofer and midrange drivers were torn. The grille cloth was torn, the wood cabinets were scratched, and the foot of one speaker needed repair.
The inspection results were used to determine the work required for this specific pair.
During Restoration
Based on the inspection results, this Acoustic Research MGC-1 pair was restored according to HQaudios’ technical standards while preserving its original engineering and voicing.
Surrounds: The deteriorated surrounds on the woofers and midrange drivers were replaced with new surrounds.
Cabinets: The foot of one speaker was repaired, and the cabinets were sanded, touched up and refinished, keeping their original color.
Grilles: The torn grille cloth was repaired, keeping the original grilles.
Crossovers: The crossover networks were checked and the capacitors were measured; all values were within tolerance.
Reassembly: All drivers were reinstalled and each speaker was tested.
MGC-1E Control Amp: The MGC-1e control and amplification electronics were tested with both speakers.
Cleaning & Detailing: The drivers, crossover boards and terminals were cleaned, and the cabinets and grilles were cleaned and detailed.
After Restoration / Final Testing
Once restoration was completed, the pair underwent comprehensive testing under real operating conditions.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
MGC-1E Control Amp Test: The MGC-1e was connected to both speakers and works normally – it powers on, delivers ambience output to both speakers, and its front-panel controls operate.
Listening Test: The pair underwent an extended real-world listening test with a wide range of music to confirm output from every driver, tonal balance, and stereo imaging.
Final QC: Every pair must pass HQaudios’ final quality-control check before it is approved for sale.
Reviews
There are no reviews yet.