Before Restoration
This Tannoy Arden MKI pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance. The crossover networks were examined for bulging or leaking capacitors, each capacitor was measured against its original value (within 10% tolerance), and the level controls, wiring and terminals were inspected.
Inspection Findings: The outer cabinets showed scratches and dents, and the cabinet interiors and speaker terminals were dusty. The front badges were scratched. On the drivers, voice-coil rub and a dented dust cap were found, and the surrounds and gaskets had deteriorated with age. The level controls (L-pads) and the crossover networks needed repair.
The inspection results were used to determine the work required for this specific pair.
During Restoration
Based on the inspection results, this Tannoy Arden MKI pair was restored according to HQaudios’ technical standards while preserving its original engineering and voicing.
Drivers: The voice-coil rub was corrected and new surrounds, gaskets and dust caps were fitted. The drivers were reinforced with fresh adhesive and anti-slip treatment at the mounting base.
Crossover Networks: The crossover networks were repaired.
Level Controls: The L-pad (Roll-Off / Energy) controls were cleaned and repaired.
Wiring & Power Checks: The internal wiring and input jacks were checked, and a power test was carried out.
Cabinets: Scratches and dents were touched up, the outer cabinets were re-veneered and finished with PU lacquer, and the interiors were blown out and cleaned.
Grilles: The grille cloth was re-tensioned and the wooden grille frames were reinforced.
Logos: The logos were restored and cleaned.
Original Drivers: All drivers retain their original cones and diaphragms, which are in good condition.
Cleaning & Detailing: The crossover boards, drivers and control knobs were cleaned and detailed.
After Restoration / Final Testing
Once restoration was completed, the pair underwent comprehensive testing under real operating conditions.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
Level Controls: The Roll-Off and Energy controls were checked on both speakers.
Listening Test: The pair underwent an extended real-world listening test with a wide range of music to confirm dynamics, tonal balance, and stereo imaging.
Final QC: Only after completing HQaudios’ restoration and testing process was the pair approved and prepared for its next owner.
Reviews
There are no reviews yet.