Pioneer SX-1010 Stereo Receiver 100WPC Restored 1-Year Warranty

$2,999

-

  • Pioneer SX-1010 AM/FM stereo receiver
  • 100 W per channel into 8 ohms
  • Classic Pioneer silver faceplate with illuminated tuning dial and meters
  • Direct-coupled stereo amplification with phono, AUX and tape connectivity
  • Wood cabinet – included with this receiver
  • Backed by our 1-Year HQaudios Warranty

1 in stock

SKU: 151THLC0290 - VS24 Categories: , ,

Pioneer SX-1010 AM/FM Stereo Receiver with HQaudios Wood Case
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
Pioneer SX-1010 classic AM/FM stereo receiver
Factory-rated 100 watts per channel into 8 ohms
Dual phono inputs and versatile tape, AUX, and microphone connections
Silver front panel, illuminated dial, and wood case handcrafted by HQaudios

PRODUCT OVERVIEW
Pioneer’s SX-1010 is a substantial 1970s AM/FM stereo receiver built around a direct-coupled two-channel power amplifier. Its multiple source inputs, separate tone-control sections, and three speaker-system connections reflect the flexibility of Pioneer’s high-power receiver designs.
This example is shown in the accompanying photographs with a silver faceplate and blue-lit meter windows.

HQAUDIOS RESTORATION & TESTING
Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
Before Restoration
We received this vintage receiver for inspection and service of its power-supply, amplifier, and supporting electronic circuits.
During Restoration
Capacitors: We tested and measured capacitors; out-of-spec units were replaced with quality, correct-value components.
Capacitor Component Schedule
The following component values and quantities were identified for capacitor service assessment:
1. 330 µF / 25 V ×10; 100 µF / 25 V ×4; 100 µF / 16 V ×4; 220 µF / 16 V ×4; 47 µF / 50 V ×4; 470 µF / 16 V ×5.
2. 1000 µF / 63 V ×4; 470 µF / 80 V ×4; 2200 µF / 35 V ×2.
3. 1000 µF / 35 V ×2; 2200 µF / 16 V ×4.
4. 100 µF / 16 V ×10; 10 µF / 50 V ×10.
5. 4.7 µF / 50 V ×10; 3.3 µF / 50 V ×10.
Power Amplifier Board: We inspected and serviced the power-amplifier section.
Circuit Boards: We cleaned and inspected the boards and reinforced weak solder joints.
Bias & DC Offset: We measured and adjusted both to Pioneer factory specifications.
Lighting: We replaced the dial and meter lamps with new lighting components.
Switches & Controls: We cleaned and serviced the selectors, switches, and controls.
Input/Output Jacks: We inspected and cleaned the receiver’s signal connections.
FM Tuner Section: We checked and serviced the FM tuner section.
Phono Stage: We tested the phono circuit for gain and channel balance.
Wood Case: We fitted a new wood case handcrafted by HQaudios.
After Restoration / Final Testing
Burn-In: We completed the standard 72-hour stability test.
Function Check: We tested the receiver’s inputs, outputs, tone controls, and speaker-system switching.
Radio & Phono: FM and phono functions were included in our standard functional testing.

CONDITION
Technical Condition
Amplifier: The two-channel signal path has undergone HQaudios functional checks.
Source Selection: The analog source-selection and switching functions were serviced.
Controls: The volume, balance, and tone controls were cleaned and serviced.
Cosmetic Condition
Faceplate: Silver-finish front panel with labeled Pioneer controls and black tuning window.
Wood Case: Warm wood-grain case handcrafted by HQaudios; the photographed side panel shows minor dark surface marks.
Overall Appearance: Please review the actual photographs for the unit’s precise cosmetic presentation and remaining vintage wear.
HQaudios standard functional QC and burn-in completed.

SPECIFICATIONS
Brand: Pioneer
Model: SX-1010
Type: AM/FM Stereo Receiver
Continuous Power Output: 100 W per channel into 8 ohms, both channels driven, 20 Hz–20 kHz
Total Harmonic Distortion: Less than 0.1% at rated continuous output
Amplifier Frequency Response: 7 Hz–100 kHz (factory specification)
Phono Inputs: Phono 1 and Phono 2 (moving-magnet)
Audio Inputs: Phono 1/2, AUX, tape playback 1/2, microphone, power amplifier input
Audio Outputs: Tape recording, preamplifier output, headphones
Speaker Systems: A, B, and C (4–16 ohms factory rated)
Tuner: FM and AM
Dimensions: 20.5 W × 6.9 H × 17.3 D in (factory chassis specification)
Product Weight: 48.9 lbs (factory specification, without packaging)

WHAT IS INCLUDED
1 × Pioneer SX-1010 AM/FM Stereo Receiver
1 × Wood case handcrafted by HQaudios
Only the items specifically listed above are included.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.

HQaudios Professional Shipping and Packaging

Please contact us before purchase for the most current availability information.
1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Warranty. Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.
MORE FROM HQAUDIOS
Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

HQaudios Vintage Audio Repair and RestorationHQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “Pioneer SX-1010 Stereo Receiver 100WPC Restored 1-Year Warranty”

Recently viewed

You have not viewed any products yet.