Before Restoration
The JBL 4410 pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance, the crossover networks were examined for bulging or leaking capacitors, and the input terminals and level controls were checked for noise and oxidation.
Inspection Findings: On this pair, the inspection found scratches and lifting veneer on the cabinets, dust inside the cabinets, scratched badges and logos, dusty knobs, dirty terminals, crackling level controls, and crackling from the midrange drivers and tweeters. All drivers were checked for voice-coil rub, surrounds, impedance and serial numbers.
The inspection results were used to determine the work required for this specific pair.
During Restoration
Based on the inspection results, this JBL 4410 pair was restored according to HQaudios’ technical standards while preserving its original engineering and voicing.
Level Controls: The L-pad attenuators were repaired to remove crackling and restore smooth, noise-free adjustment.
Midrange Drivers & Tweeters: The crackling fault on the midrange drivers and tweeters was traced and repaired.
Woofers: The magnet assemblies were reinforced with adhesive to prevent shifting.
Crossover Networks: Both crossover networks were checked and confirmed in good working order.
Cabinets: The veneer was repaired and the cabinets were refinished in walnut-tone PU lacquer. The interiors were cleaned.
Badges & Logos: The badges and logos were replaced with new ones.
Grilles: New grille cloth was fitted and the grille frames were reinforced with adhesive.
Controls: The control knobs were cleaned.
Original Drivers: All drivers retain their original cones and diaphragms, which are in good condition.
Cleaning & Detailing: The drivers, crossover boards and terminals were cleaned, and the cabinets and grilles were cleaned and detailed.
After Restoration / Final Testing
Once restoration was completed, the pair underwent comprehensive testing under real operating conditions.
Frequency Response: Measured with an RTA (real-time analyzer) and a calibrated sound card to confirm a flat, well-balanced response and close matching between the two speakers.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
Level Controls: The level controls were checked for smooth, noise-free adjustment on both speakers.
Listening Test: The pair underwent an extended real-world listening test with a wide range of music to confirm dynamics, tonal balance, and stereo imaging.
Final QC: Only after completing HQaudios’ restoration and testing process was the pair approved and prepared for its next owner.
Reviews
There are no reviews yet.