Sansui 6060 40 WPC Stereo Receiver – Professionally Restored – 1-Year Warranty

Offered here is a vintage Sansui 6060 AM/FM Stereo Receiver from Sansui’s classic 1970s receiver era. The 6060 combines a 40-watt-per-channel stereo amplifier with an AM/FM tuner, phono input, bass and treble controls, loudness, high and low filters, audio muting, signal and tuning meters, headphone output, and dual speaker-system operation.

This unit has been inspected, cleaned, serviced, and fully tested by HQaudios prior to sale. This listing is for the actual Sansui 6060 shown in the listing photographs.

• Sansui 6060 AM/FM Stereo Receiver
• 40 Watts per Channel into 8 Ohms
• Both channels driven, 20 Hz–20 kHz
• Built-in AM/FM stereo tuner
• Integrated phono input
• Bass and treble tone controls
• High / Low filters
• Loudness control
• Audio muting
• Signal and tuning meters
• Speaker A / B operation
• Headphone output
• Phono, AUX, Tape and Microphone connectivity
• Professionally serviced and fully tested by HQaudios
• 1-Year HQaudios Warranty

We inspected this Sansui 6060 before sale, with attention to the amplifier section, power supply, AM/FM tuner, phono section, controls, switches, speaker connections, RCA connections, meters, illumination, and general operating condition.

Our technicians cleaned and prepared the receiver according to the condition identified during inspection.

We checked the controls, switches, inputs, outputs, speaker connections, tuner functions, meters, and illumination for normal operation.

We tested the receiver’s major functions under normal operating conditions, including:

• Left and right channel operation
• AM/FM tuner operation
• Phono input operation
• AUX input operation
• Tape functions
• Speaker A / B outputs
• Bass and treble controls
• High / Low filters
• Loudness function
• Audio muting
• Signal and tuning meters
• Dial illumination
• Power Supply & Amplifier Service: Serviced the power supply and amplifier circuitry to address age-related electronic issues.
• Capacitor Replacement: Replaced aged electrolytic capacitors with new components of the specified capacitance and voltage ratings.
• Transistor & Resistor Replacement: Replaced electronic components, including A1015, C1815, and C2383 transistors, along with 220-ohm resistors.
• Tuner & Switch Service: Serviced the radio tuner circuitry and switch assemblies as part of the restoration work.

After completing the service and functional checks, we operated the receiver under real listening conditions to confirm stable playback and consistent channel operation before preparing it for sale.

In normal listening, the Sansui 6060 provides the balanced and engaging presentation associated with Sansui’s mid-1970s stereo receivers.

Its 40-watt-per-channel amplifier provides useful output for a wide range of compatible passive speakers, while the bass and treble controls, filters, loudness, and muting functions provide practical adjustment for different rooms and listening levels.

The built-in phono section and AM/FM tuner also make the 6060 well suited to a traditional vintage analog system.

This Sansui 6060 presents in very good vintage cosmetic condition with light age-related wear consistent with previous use.

The silver faceplate, knobs, switches, dial area, meters, and wood-finish case present well overall.

Light marks and normal vintage wear may be visible on the wood surfaces, edges, corners, and other exterior areas.

Please review all listing photographs carefully, as they show the actual receiver being offered and form an important part of the cosmetic-condition description.

1 Sansui 6060 Stereo Receiver as shown in the listing photographs

1-Year HQaudios Warranty

Only items specifically shown in the photographs or listed above are included.

The Sansui 6060 can be paired with a wide range of compatible vintage passive loudspeakers when impedance, sensitivity, room size, and listening level are considered.

Use speakers with an appropriate impedance for the selected A, B, or A+B configuration, and avoid sustained amplifier clipping or excessive volume levels.

• Use speakers with an appropriate impedance for the selected speaker configuration
• Verify speaker wiring before powering on the receiver
• Maintain adequate ventilation around the receiver
• Avoid sustained amplifier clipping or excessive volume levels
• Contact us if you need assistance with setup, speaker matching, or source connections

Do you have vintage audio equipment you would like to trade in?

We welcome trade-in inquiries for vintage receivers, amplifiers, speakers, turntables, cassette decks, reel-to-reel decks, and other classic audio components.

Vintage receivers are heavy and delicate and require careful protection during shipment.

We will prepare this Sansui 6060 with protection focused on the faceplate, dial area, meters, knobs, switches, cabinet surfaces, corners, and rear connections.

Tracking information will be provided after shipment, and signature confirmation may be required depending on the shipping service.

This Sansui 6060 is backed by our 1-Year HQaudios Warranty covering qualifying electronic and functional issues under normal intended home use.

Coverage does not include misuse, physical damage, unauthorized repair or modification, incorrect wiring, incompatible equipment, amplifier clipping, moisture exposure, cosmetic wear, or operation outside normal intended conditions.

If you experience an operational issue after delivery, please contact us so our team can assist with diagnosis and support.

Please contact HQaudios if you need assistance with speaker connections, turntable setup, tape operation, switch settings, system matching, or general operation.

HQaudios – Vintage Audio Restored with Care.

Professionally Serviced – Fully Tested – Carefully Packed – 1-Year Warranty.