JBL L3 Speakers (Pair) – Professionally Restored – Fully Tested – 1-Year Warranty

Original price was: $1,499.Current price is: $1,399.

-

Professionally Restored by HQaudios – Fully Tested – Backed by Our 1-Year Warranty.

  • Authentic pair of vintage JBL L3 floorstanding speakers
  • Part of JBL’s respected 1990s L-Series lineup
  • 2-Way design with JBL titanium dome tweeter
  • Elegant slim floorstanding cabinets in black finish
  • Professionally Restored by HQaudios – Fully Tested
  • Carefully packed for safe shipping
  • Backed by Our 1-Year HQaudios Warranty

1 in stock

SKU: 15DQS1672 Categories: , ,

JBL L3 2-Way Floorstanding Speaker Pair
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
JBL L3 vintage 2-way floorstanding stereo loudspeaker system.
8-inch low-frequency driver with die-cast frame.
1-inch pure titanium dome tweeter.
35 Hz – 27 kHz factory-rated frequency response.
8-ohm nominal impedance and 89 dB sensitivity.
Factory-recommended amplifier power: 35-250 watts.
Crossover capacitor inspection and component service performed by HQaudios.
Black floorstanding cabinet design with tuned bass-reflex enclosure.
Backed by our 1-Year HQaudios Warranty.

PRODUCT OVERVIEW
The JBL L3 is a classic floorstanding loudspeaker from JBL’s early-1990s L Series. Its two-way architecture combines an 8-inch low-frequency driver with a 1-inch pure titanium dome high-frequency transducer.
Designed with a narrow, slanted front baffle and a tuned-port enclosure, the L3 was engineered to provide wide sound dispersion, clear stereo imaging, and extended low-frequency reproduction.
The JBL L3 also features a carefully engineered crossover network and rear speaker connections, making it suitable for traditional stereo Hi-Fi systems using compatible receivers or integrated amplifiers.
This pair has undergone HQaudios inspection and service, including evaluation of the crossover capacitors and attention to age-related component deterioration. The work was performed with the goal of preserving the established JBL L3 design and supporting reliable continued operation.

HQAUDIOS RESTORATION & TESTING

Before Restoration
We evaluated this JBL L3 speaker pair with attention to the condition of its electronic components and loudspeaker assemblies.
Crossover Networks: We inspected the crossover circuitry and evaluated capacitor aging and electrical characteristics.
Capacitors: We checked capacitance values, component condition, and signs of age-related deterioration.
Speaker Drivers: We inspected the low-frequency and high-frequency driver sections and their accessible connections.
Connections: We inspected the speaker terminals, wiring connections, and accessible electrical contact points.
Cabinet Assemblies: We examined the cabinet construction and accessible mounting components as part of the service inspection.

During Restoration
We performed the approved HQaudios service procedures for this JBL L3 pair, focusing on the crossover circuitry, component condition, and electrical connections.
Capacitor Inspection & Replacement:
Our technicians measured the applicable crossover capacitors and evaluated their capacitance, ESR, leakage, and physical condition. Deteriorated capacitors with capacitance deviations exceeding 5% from nominal were replaced with suitable components selected for the circuit’s electrical requirements.
Crossover Network Service:
We inspected the crossover boards and associated components, checked accessible electrical connections, and serviced the affected areas.
Component Inspection:
We examined accessible resistors, wiring, and related components for visible damage or deterioration.
Internal Cleaning:
We cleaned accessible interior service areas and removed accumulated dust from the serviced components.
Contacts & Connections:
We inspected and cleaned accessible electrical contacts and speaker connection points.
Solder Joint Inspection:
We inspected the accessible solder connections in the serviced sections for signs of deterioration.
Driver Inspection:
We examined the woofer and tweeter assemblies, including accessible wiring and mounting areas.
Mechanical Inspection:
We reviewed accessible mounting hardware and cabinet-related components during the service process.
Exterior Cleaning:
We cleaned accessible exterior surfaces using methods appropriate for the cabinet finish and speaker components.

After Restoration / Final Testing
Following the service work, we carried out follow-up inspection of the serviced crossover circuitry and associated electrical connections.
Replacement Capacitors:
We reviewed the installation and electrical suitability of the replacement components.
Crossover Connections:
We inspected the serviced connection points for correct assembly and electrical contact.
Driver Connections:
We reviewed the accessible woofer and tweeter wiring connections.
Final Inspection:
We completed a post-service inspection of the areas addressed during restoration.

CONDITION
Technical Condition
Crossover Capacitors:
Inspected and serviced, with deteriorated components exceeding the approved 5% capacitance-deviation threshold replaced.
Crossover Circuitry:
Accessible circuit components and connections inspected during service.
Woofer & Tweeter Assemblies:
Included in the speaker inspection and service review.
Electrical Connections:
Accessible internal wiring and speaker connection points inspected and serviced.

Cosmetic Condition
Finish: Black.
Cabinet Design:
Narrow floorstanding enclosure with a slanted front baffle.
Exterior Appearance:
Please examine the actual product photographs closely for the appearance of the cabinet surfaces, front baffles, rear panels, edges, and other visible details.

Crossover Capacitor Service Completed
Electrical Connections Inspected
Post-Service Inspection Completed

SPECIFICATIONS
Brand: JBL
Model: L3
Type: Floorstanding Stereo Loudspeaker System
Enclosure: Tuned Port / Bass Reflex
Configuration: 2-Way, 2-Driver
Low-Frequency Driver: 8-inch (200 mm), die-cast frame
High-Frequency Driver: 1-inch (25 mm) pure titanium dome
Frequency Response: 35 Hz – 27 kHz (±6 dB, factory brochure)
Nominal Impedance: 8 Ohms
Sensitivity: 89 dB / 1 W / 1 m
Recommended Amplifier Power: 35-250 W
Crossover Frequency: 3 kHz
Dimensions: 9.6 W × 32.9 H × 12.0 D in – each speaker
Weight: 30.0 lbs – each speaker
Factory Finish: Black lacquer on ash veneer

WHAT IS INCLUDED
1 Pair of JBL L3 Floorstanding Speakers (2 speakers).
Only the items specifically listed above are included.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.

HQaudios Professional Shipping and Packaging

Please contact us before purchase for the most current availability information.

1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Warranty. Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.

MORE FROM HQAUDIOS
Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

HQaudios Vintage Audio Repair and Restoration

HQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “JBL L3 Speakers (Pair) – Professionally Restored – Fully Tested – 1-Year Warranty”

Recently viewed

You have not viewed any products yet.