Before Restoration
This Wharfedale Airedale pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance. The crossover networks were examined for bulging or leaking capacitors, each capacitor was measured against its original value (within 10% tolerance), and the wiring and terminals were inspected.
Inspection Findings: The woofer and midrange voice-coil resistance was within the required range. The tweeter section measured outside the required specification. The original grille logos were missing.
The inspection results were used to determine the work required for this specific pair.
During Restoration
Based on the inspection results, this Wharfedale Airedale pair was serviced and refinished according to HQaudios’ technical standards while preserving its original engineering and voicing.
Woofers & Midrange: The woofer and midrange surrounds were replaced with new, correctly fitted surrounds. Driver frames, terminals and connection points were inspected and cleaned.
Tweeters: The tweeter section was serviced and corrected, then re-measured and tested to confirm proper operation.
Drivers: All drivers retain their original cones and diaphragms, which are in good condition.
Crossovers: Both crossover networks were inspected; the capacitors and inductors were individually measured and the original components that met the required measurements were retained.
Level Controls: The L-pad level controls were removed, and their windings, contact surfaces and wiper assemblies were cleaned for stable contact and smooth adjustment.
Wiring: Internal wiring and connection points were inspected, and connections were reinforced with solder where necessary.
Cabinets: Both cabinets were re-veneered and refinished to closely match the original color, and the cabinet interiors were cleaned.
Grilles: The grille cloth was replaced with new cloth, and a new matching pair of reproduction grille logos was made because the original logos were missing.
Terminals: The rear speaker terminals were cleaned with a contact-cleaning solution.
After Restoration / Final Testing
Once service was completed, the pair underwent comprehensive testing under real operating conditions.
Measurement: Each woofer, midrange and tweeter was measured individually after service.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
Listening Test: A final left/right listening test was carried out with a wide range of music.
Final QC: The pair passed a final visual inspection and a separate QC review during media preparation and packing before approval for sale.
Reviews
There are no reviews yet.