SOUND DEMO / AUDIO EXPERIENCE

For the best audio experience, please use headphones or external speakers.
JBL L80T 10″ 3-Way Floorstanding Speaker Pair – Walnut Finish
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty
KEY HIGHLIGHTS
JBL L80T – 3-way floorstanding loudspeaker from JBL’s L Series T line (1985 – 1991)
10-inch Aquaplas laminate woofer
5-inch high-polymer laminate midrange and 1-inch pure titanium dome tweeter
35 Hz – 27 kHz (−6 dB) frequency response, 8-ohm nominal impedance, 90 dB sensitivity
Crossovers at 800 Hz and 4.5 kHz, 150 W continuous power handling
All original JBL drivers – cones and diaphragms in good condition
Walnut finish cabinets with black grilles
Professionally inspected, serviced and tested by HQaudios
Backed by our 1-Year HQaudios Seller Warranty
PRODUCT OVERVIEW
The JBL L80T is a three-way floorstanding loudspeaker from JBL’s L Series “T” line, introduced in 1985 and produced until 1991. It combines a 10-inch Aquaplas laminate woofer, a 5-inch high-polymer laminate midrange and a 1-inch pure titanium dome tweeter in a bass-reflex cabinet.
Crossover points at 800 Hz and 4.5 kHz, 90 dB sensitivity and an 8-ohm nominal impedance make the L80T easy to drive with a wide range of amplifiers, and its 150-watt continuous power handling lets it fill larger rooms with ease.
This pair has walnut finish cabinets with black grilles and is ready for a home system or a vintage JBL collection.
HQAUDIOS RESTORATION & TESTING
Before Restoration
This JBL L80T pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance. The crossover networks were examined for bulging or leaking capacitors, each capacitor was measured against its original value (within 10% tolerance), and the wiring and terminals were inspected.
The inspection results were used to determine the service required for this specific pair.
During Restoration
Based on the inspection results, this JBL L80T pair was serviced according to HQaudios’ technical standards while preserving its original engineering and voicing.
Original Drivers: All drivers retain their original cones and diaphragms, which are in good condition.
Cleaning & Detailing: The drivers, crossover boards and terminals were cleaned, and the cabinets and grilles were cleaned and detailed.
After Restoration / Final Testing
Once service was completed, the pair underwent comprehensive testing under real operating conditions.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
Listening Test: The pair underwent an extended real-world listening test with a wide range of music to confirm dynamics, tonal balance, and stereo imaging.
Final QC: Only after completing HQaudios’ inspection and testing process was the pair approved and prepared for its next owner.
CONDITION
Technical Condition
Woofers: Original JBL 10-inch Aquaplas laminate woofers – inspected and tested
Midrange & Tweeters: Original JBL drivers – inspected and tested
Crossover Networks: Inspected; capacitors measured against original values
Wiring & Terminals: Inspected
Phase: Polarity checked on both speakers
Cosmetic Condition
Cabinets: Walnut finish cabinets in clean, presentable condition with light signs of age
Grilles: Original black grilles
Overall Presentation: A clean, presentable vintage pair. Please review all photos for exact cosmetic details.
Drivers Inspected & Tested
Crossover Capacitors Measured
Phase Checked
Final Listening Test Completed
SPECIFICATIONS
Brand: JBL
Model: L80T
Type: 3-Way Bass-Reflex Floorstanding Loudspeaker
Years of Production: 1985 – 1991
Low Frequency Driver: 10-inch Aquaplas laminate woofer
Midrange Driver: 5-inch high-polymer laminate midrange
High Frequency Driver: 1-inch pure titanium dome tweeter
Crossover Frequencies: 800 Hz / 4.5 kHz
Frequency Response: 35 Hz – 27 kHz (−6 dB); 45 Hz – 20 kHz (+/−2.5 dB)
Nominal Impedance: 8 Ohms
Sensitivity: 90 dB SPL (2.83 V / 1 m)
Power Handling: 150 W continuous (600 W peak)
Dimensions (each): approx. 14 W x 33.5 H x 11.75 D in
Shipping Weight (each, factory): approx. 58 lbs
Finish: Walnut finish cabinets / black grilles
WHAT IS INCLUDED
1 Pair of JBL L80T Speakers
2 Black Grilles shown in the listing photos
Only the items specifically listed above are included. No stands are included; any stands or bases shown in the photos are for display only. Speaker cables and other accessories are not included.
SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.
Please contact us before purchase for the most current availability information.
1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Seller Warranty (this is an HQaudios warranty, not a JBL manufacturer warranty). Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.
MORE FROM HQAUDIOS


Reviews
There are no reviews yet.