Sansui G-8000 Pure Power DC Stereo Receiver–Fully Serviced & Recapped – 1-Yr WRT

$3,999

-

  • MODEL: Sansui G-8000
  • TYPE: Pure Power DC Stereo Receiver
  • WARRANTY: 1-Year Warranty
  • SKU: 15QALE3764

1 in stock

SKU: 15QALE3764 Categories: ,

Sansui G-8000 Pure Power DC Stereo Receiver–Fully Serviced & Recapped – 1-Yr WRT

  • MODEL: Sansui G-8000
  • TYPE: Pure Power DC Stereo Receiver
  • WARRANTY: 1-Year Warranty
  • SKU: 15QALE3764

Sansui G-8000 Pure Power DC Stereo Receiver

The Sansui G-8000 is one of the most iconic monster receivers of the late 1970s, delivering massive power, stunning analog meters, and exceptional DC-coupled audio performance. With its premium build, silky smooth controls, and legendary Sansui sound signature, the G-8000 is a true collector-level centerpiece for any vintage setup.

This unit has been fully serviced, restored to spec, electrically validated, and is 100% ready for long-term daily listening.

  • MODEL: Sansui G-8000
  • TYPE: Pure Power DC Stereo Receiver
  • WARRANTY: 1-Year Warranty
  • SKU: 15QALE3764

Customer Service:

Once your item arrives, if you have questions about how your item functions or proper settings, please CONTACT US.

TRADE-IN PROGRAM

“If you have any vintage audios (receivers, speakers, cassette, reel to reel…) & want to upgrade with the serviced one, don’t hesitate to contact us for the best deal. You only need to pay for the difference between yours & mine….”

Note:

The actual color of the product may sometimes differ slightly from the photos due to lighting conditions, temperature, and the device used. Some angles in the photos may not fully reflect the product’s condition. Please read the description carefully and feel free to message us if you have any questions.

SPECS:

  • Tuning range: FM, MW
  • Power output: 120 watts per channel into 8Ω (stereo)
  • Frequency response: 5Hz to 50kHz
  • Total harmonic distortion: 0.03%
  • Damping factor: 60
  • Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
  • Signal to noise ratio: 78dB (MM), 95dB (line)
  • Channel separation: 60dB (MM), 70dB (line)
  • Output: 150mV (line), 43mV (DIN), 1V (Pre out)
  • Speaker load impedance: 4Ω to 8Ω
  • Semiconductors: 104 x transistors, 70 x diodes, 11 x FET, 7 x IC, 10 x LED
  • Dimensions: 22.1″ × 7.9″ × 18.7″
  • Weight: 54.23 lbs

KEY FEATURES

  • Massive 120W per channel of clean Pure Power DC output
  • Dual illuminated VU power meters (left/right)
  • High-accuracy FM section with excellent stereo separation
  • Premium Sansui tone: deep bass, warm midrange, clean extended highs
  • Heavy-duty construction with large transformer and heat sinks

REFURBISHED

This Sansui G-8000 has been fully refurbished by HQaudios, including full electronic servicing, cosmetic restoration, and calibration. The front faceplate has been anodized in deep black, giving the receiver a bold, modern, and unique look while preserving its classic Sansui character.

All knobs have been black-plated to match the new finish.

Note: A few knobs show minor coating scratches, and the rear panel has some light marks near the power cord area. These are cosmetic only and do not affect performance.

A brand-new wooden cabinet is included. Comes with 1-year technical warranty.

1. Initial Inspection & Diagnostics

Full interior and exterior inspection

All switches, knobs, and controls tested

All inputs verified:

Phono 1/Phono 2, AUX, TUNER, Tape Monitor

Tuner section (AM/FM) checked for sensitivity and stable signal lock

Output stages tested for channel balance and power stability

All meters and lamps checked

2. Electronic Refurbishment

Deep cleaning of all internal boards

Replacement of weak/aged capacitors where needed

Power supply section restored and voltage rails stabilized

Driver boards inspected, solder joints reflowed where necessary

Protection relay cleaned and tested

Bias and DC offset adjusted to factory specs

Full DeoxIT service on:

Volume, balance, bass, midrange, treble

Loudness, filters

Function & Tape Monitor switches

3. Controls, Switches & Signal Path

All pots rotate smoothly — no static noise

Tape monitor loops tested and working

Phono stage tested for correct gain and low noise

Headphone output tested

All filters and loudness functions verified

4. Cosmetic Restoration

Faceplate re-anodized in black – clean, sharp, updated look

Black-plated knobs, matching the new aesthetic

Some knobs show light plating scratches

Rear panel cleaned — light scratches near power cord socket

Brand-new wooden cabinet, cleanly finished and well-fitted

Glass, dial, meters, and lettering cleaned and detailed

Overall condition: excellent, bold, and visually striking

5. Final Testing & Calibration

Frequency response checked (20Hz–20kHz)

Stereo separation and channel tracking verified

AM/FM tuner aligned

Power output tested under load

2-hour burn-in test for thermal stability

Passed HQaudios Certified QC process

SUGGESTED PAIRINGS

Ideal matches from HQaudios inventory:

  • JBL L100 / L112 / L166
  • Klipsch Heresy I/II
  • Sansui SP-X series
  • Pioneer HPM-60 / HPM-100

💡 Buy as a combo and save $100 — message us for details!

 

PACKAGING & SHIPPING

Secure Packaging:

  • Factory foam inserts and original cartons (if available)
  • Additional internal padding and wrap for transit protection
  • Double-wall outer box with corner guards and straps

Shipping Details:

  • Dispatch Time: Ships within 3 business days
  • Carrier: UPS Ground (tracked & insured)
  • Signature Required: Yes (as buyer’s request)
  • Transit Time: Typically 3–7 business days (USA)

International Shipping:

We offer global delivery through the eBay International Shipping Program. eBay handles customs, duties, and tracking.

📦 Note: Packaging may vary slightly depending on unit size or availability, but safety and protection are always our top priority.

 

Reviews

There are no reviews yet.

Be the first to review “Sansui G-8000 Pure Power DC Stereo Receiver–Fully Serviced & Recapped – 1-Yr WRT”

Recently viewed

You have not viewed any products yet.