Before Restoration
The JBL L100T pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance. The crossover networks were examined for bulging or leaking capacitors, each capacitor was measured against its original value (within 10% tolerance), and the wiring and terminals were inspected.
Inspection Findings: The foam surrounds on both woofers had deteriorated and torn, and one woofer also produced a buzzing sound. The tweeters in both speakers produced no output. The midrange drivers were in good working order. The grilles were torn, and the cabinets showed scratches, chipped corners and edges, and an open edge seam.
The inspection results were used to determine the work required for this specific pair.
During Restoration
Based on the inspection results, this JBL L100T pair was restored according to HQaudios’ technical standards while preserving its original engineering and voicing.
Tweeters: The tweeters in both speakers were repaired and restored to full output.
Woofers: The deteriorated foam surrounds on both woofers were replaced with new foam surrounds.
Cabinets: The scratches, chipped corners and edges, and the open edge seam on both cabinets were repaired.
Grilles: The torn grilles were replaced with new grilles.
Midrange Drivers: Both midrange drivers retain their original cones, which are in good condition.
Cleaning & Detailing: The drivers, crossovers and terminals were cleaned, and the speakers were reassembled.
After Restoration / Final Testing
Once restoration was completed, the pair underwent comprehensive testing under real operating conditions.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
Driver Check: The woofer, midrange and tweeter were checked on both speakers after restoration.
Listening Test: The pair underwent an extended real-world listening test with a wide range of music to confirm output from every driver, tonal balance, and stereo imaging.
Final QC: Every pair must pass HQaudios’ final quality-control check before it is approved for sale.
Reviews
There are no reviews yet.