Yamaha NS-1000M Amber-Orange Studio Monitor Speakers Pair – Professionally Restored – 1-Year Warranty

$2,699

-

  • Yamaha NS-1000M vintage Japanese three-way studio monitor pair
  • Distinctive light amber-orange woodgrain appearance across both cabinets and front baffles
  • 3-way, 3-driver sealed enclosure
  • 300 mm (12-inch) cone woofer
  • 88 mm pure beryllium dome midrange – Yamaha factory design
  • 30 mm pure beryllium dome tweeter – Yamaha factory design
  • 40 Hz – 20 kHz published frequency response
  • 90 dB / 1 W / 1 m factory sensitivity
  • 8-ohm nominal impedance
  • 50W JIS rated / 100W maximum input factory specifications
  • 500 Hz / 6,000 Hz crossover frequencies
  • Independent MID LEVEL and HIGH LEVEL controls
  • Black driver-protection grilles and silver-tone mounting trim
  • Contrasting black rear cabinet panels
  • Made in Japan
  • Speaker stands and separate full-front grilles are not included.
  • Backed by our 1-Year HQaudios Warranty

1 in stock

SKU: 2QE0238 - VS24 Categories: ,



SOUND DEMO / AUDIO EXPERIENCE


Yamaha NS-1000M Amber-Orange Speaker Pair Sound Demo

For the best audio experience, please use headphones or external speakers.

Yamaha NS-1000M Amber-Orange Monitors – Restored – 1-Year Warranty
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
Yamaha NS-1000M classic Japanese three-way studio monitor speaker pair
Distinctive amber-orange cabinet appearance with contrasting black rear panels
Pure beryllium dome midrange and tweeter driver technology
Sealed acoustic suspension enclosure design
Independent MID LEVEL and HIGH LEVEL adjustment controls
Midrange output corrected and scratchy L-Pad operation serviced by HQaudios
Replacement identification labels and logo installed during refurbishment

PRODUCT OVERVIEW
The Yamaha NS-1000M is a landmark Japanese monitor loudspeaker recognized for its advanced driver technology, sealed acoustic design and detailed sound reproduction. Its distinctive three-way architecture reflects Yamaha’s approach to accurate monitoring and high-quality audio reproduction.
One of the defining features of the NS-1000M is Yamaha’s use of pure beryllium dome diaphragms in its midrange and high-frequency sections. Beryllium combines low moving mass with high rigidity, supporting fast transient response and detailed reproduction.
The sealed acoustic suspension enclosure provides a controlled cabinet design, while dedicated low-, mid- and high-frequency sections handle their respective portions of the audio spectrum.
Separate MID LEVEL and HIGH LEVEL controls allow listeners to adjust the midrange and high-frequency presentation to suit their listening environment and personal preferences.
This particular pair features an amber-orange exterior appearance, offering a distinctive visual presentation compared with the familiar black NS-1000M finish.

HQAUDIOS RESTORATION & TESTING

Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.

Before Restoration
When this Yamaha NS-1000M pair was received, the exterior cabinets, identification labels and logo showed scratches. The cabinet interiors and speaker terminals had accumulated dust and dirt.
During the initial functional inspection, the L-Pad level controls exhibited scratchy/noisy operation, and the midrange section produced lower-than-normal output. The woofer surrounds, cones, protective grilles, driver resistance and identification details were also included in the inspection.

During Restoration
Driver Inspection & Measurement: We inspected the woofer surrounds, cones, protective grilles and trim, tested each driver, measured DC resistance and checked driver identification and serial details.
Midrange Repair: We corrected the low midrange output condition and verified normal output during final testing.
Level Controls (L-Pads): We serviced the L-Pad level controls to correct scratchy/noisy operation and restore smooth adjustment.
Crossover Networks: We inspected and measured crossover components; out-of-spec capacitors were replaced with quality, correct-value parts.
Cabinet Restoration: We refinished the exterior cabinet surfaces with an oil-based finish to renew their appearance.
Interior Cabinet Cleaning: We removed accumulated dust and dirt from the cabinet interiors.
Identification Labels: We replaced the worn identification labels with new labels.
Logo Replacement: We installed a replacement logo on the speaker cabinet.
Rotary Controls: We cleaned the control knobs and surrounding areas and removed accumulated dust.
Speaker Terminals & Internal Wiring: We cleaned and polished the speaker terminals using metal polish and inspected and cleaned the internal wiring.
Driver Protection Grilles: We cleaned and restored the fitted protective grille assemblies.
Gaskets & Mounting Hardware: We inspected driver mounting hardware and gaskets to verify secure installation and proper cabinet sealing.

After Restoration / Final Testing
Burn-In Test: A 72-hour burn-in test was completed on every speaker to verify performance and operational stability.
Driver Testing: Each speaker underwent frequency-sweep and listening tests. Driver DC resistance and identification details were checked and recorded.
Midrange Output: Normal midrange output was confirmed following the repair.
L-Pad Operation: Smooth level adjustment was confirmed without the previously noted scratchy/noisy operation.

CONDITION

Technical Condition
Woofer Assemblies: Both low-frequency driver sections are operational, with output confirmed during final testing.
Midrange Assemblies: Both midrange sections operate with normal output following service.
Tweeter Assemblies: Both high-frequency sections produced output during functional and listening tests.
Crossover Networks: The passive crossover system operated during final functional and acoustic testing.
MID LEVEL / HIGH LEVEL Controls: The level adjustment controls operate smoothly without the previously noted scratchy/noisy behavior.
Speaker Connections: The rear speaker connection points are clean and functional.

Cosmetic Condition
Cabinet Exterior: Both cabinets feature an amber-orange oil-based finish, providing a distinctive appearance across the pair.
Top & Side Panels: The orange exterior finish extends across the top and side surfaces.
Front Baffles: Both front panels retain the characteristic Yamaha three-driver arrangement, silver-tone mounting trim and black level-control plates.
Identification Labels & Logo: Replacement identification labels and logo are fitted following refurbishment. These are replacement details, not claims of original factory labels.
Woofer Protection Grilles: The woofer sections retain their individual circular protective metal grilles.
Midrange & Tweeter Protection: Both upper driver sections retain their fitted black protective metal mesh covers and silver-tone mounting frames.
Level Controls: The black MID LEVEL and HIGH LEVEL control knobs and their identification plates remain fitted.
Rear Panels & Terminals: The black rear cabinet panels retain their recessed identification and connection plates. The speaker terminals have been cleaned and polished.
Overall Presentation: A distinctive amber-orange Yamaha NS-1000M pair combining its recognizable three-driver front layout, dark protective grilles, silver-tone trim and black rear panels. Minor age-related details remain on selected exposed metal and grille surfaces.
Please review all product photographs carefully for the exact cosmetic condition and appearance of this actual pair.

Final Functional Quality-Control Inspection Completed Before Release

SPECIFICATIONS
Brand: Yamaha
Model: NS-1000M
Type: Three-Way Passive Studio Monitor
Enclosure: Sealed / Acoustic Suspension
Configuration: 3-Way, 3-Speaker
Low-Frequency Driver: 300 mm / 12-Inch Cone
Midrange Driver: 88 mm / 3.5-Inch Pure Beryllium Dome
High-Frequency Driver: 30 mm / 1.2-Inch Pure Beryllium Dome
Frequency Response: 40 Hz – 20,000 Hz
Nominal Impedance: 8 Ohms
Sensitivity: 90 dB / 1 W / 1 m
Rated Input Power: 50 Watts (JIS Continuous)
Maximum Input Power: 100 Watts
Crossover Frequencies: 500 Hz / 6,000 Hz
Level Controls: Independent MID LEVEL and HIGH LEVEL Controls
Dimensions: 14.8 W x 26.6 H x 12.8 D Inches – Each Speaker
Weight: 68.3 lbs – Each Speaker
Actual Unit Finish: Amber-Orange

WHAT IS INCLUDED
1 Pair (2) Yamaha NS-1000M Studio Monitor Speakers
Installed Individual Driver Protective Grilles
Only the items specifically listed above are included. Separate removable full-front grille panels, speaker stands, amplifiers, speaker cables and other display accessories are not included.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.

HQaudios Professional Shipping and Packaging

Please contact us before purchase for the most current availability information.

1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Warranty. Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.

MORE FROM HQAUDIOS
Need restoration, repair, a custom faceplate or wood case, speaker stands, or a trade-in option? Contact HQaudios for available services and package pricing.

HQaudios Vintage Audio Repair and Restoration

HQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “Yamaha NS-1000M Amber-Orange Studio Monitor Speakers Pair – Professionally Restored – 1-Year Warranty”

Recently viewed

You have not viewed any products yet.