Infinity RS IIIB Floorstanding Speakers – Professionally Restored – 1-Year Warranty

$2,399

-

  • Infinity Reference Standard RS IIIB – 3-way floorstanding loudspeakers, sold as a pair
  • Two 10-inch polypropylene woofers per speaker
  • Infinity Polydome midrange and EMIT planar tweeter
  • New foam surrounds on all four woofers
  • All original Infinity drivers – cones and diaphragms in good condition
  • Oak side panels with fluted edges, black front baffles and brown grille cloth
  • Backed by our 1-Year HQaudios Warranty
SKU: 1SELC2907 - US Categories: , ,

Infinity RS IIIB Floorstanding Speakers – Professionally Restored – 1-Year Warranty
Professionally Restored by HQaudios – Inspected & Tested – Backed by Our 1-Year Warranty

KEY HIGHLIGHTS
Infinity Reference Standard RS IIIB – 3-way floorstanding loudspeakers, sold as a pair
Two 10-inch polypropylene woofers per speaker
Infinity Polydome midrange and EMIT planar tweeter
New foam surrounds on all four woofers
All original Infinity drivers – cones and diaphragms in good condition
Oak side panels with fluted edges, black front baffles and brown grille cloth
Backed by our 1-Year HQaudios Warranty

PRODUCT OVERVIEW
The Infinity Reference Standard RS IIIB is a 3-way floorstanding loudspeaker produced by Infinity from 1982 to 1984.
Each speaker combines 10-inch polypropylene woofers with Infinity’s Polydome midrange and EMIT planar tweeter, crossed over at 600 Hz and 4 kHz.
This pair has been inspected, serviced, and tested by HQaudios, including new foam surrounds on all four woofers. The photos show the actual pair you will receive.


HQAUDIOS RESTORATION & TESTING

Before Restoration
This Infinity RS IIIB pair was carefully inspected upon arrival to evaluate its mechanical, electrical, and cosmetic condition.
Each cabinet, cone, surround, and spider was checked for originality and for glue joints that had loosened or shifted with age. Every driver was tested by hand for voice-coil rub – a scratching noise or a stiff, binding cone indicates a shifted or heat-damaged voice coil. The DC resistance of every driver was checked against its nominal impedance. The crossover networks were examined for bulging or leaking capacitors, each capacitor was measured against its original value (within 10% tolerance), and the wiring and terminals were inspected.
Inspection Findings: The foam surrounds on all four woofers (two per speaker) had to be replaced.
The inspection results were used to determine the work required for this specific pair.

During Restoration
Based on the inspection results, this Infinity RS IIIB pair was restored according to HQaudios’ technical standards while preserving its original engineering and voicing.
Woofers: New foam surrounds were fitted to all four woofers, two in each speaker.
Reassembly: The speakers were reassembled and tested after the woofer work.
Drivers: All drivers retain their original cones and diaphragms, which are in good condition.
Cleaning & Detailing: The drivers, crossover boards and terminals were cleaned, and the cabinets and grilles were cleaned and detailed.

After Restoration / Final Testing
Once restoration was completed, the pair underwent comprehensive testing under real operating conditions.
Phase Check: Driver polarity was verified using a phase-reversal check to ensure both speakers play in correct phase.
Listening Test: The pair underwent an extended real-world listening test with a wide range of music to confirm dynamics, tonal balance, and stereo imaging.
Final QC: Every pair must pass HQaudios’ final quality-control check before it is approved for sale.

CONDITION

Technical Condition
Woofers: 10-inch polypropylene woofers with new foam surrounds, working on both speakers
Midrange: Polydome midrange drivers working on both speakers
Tweeters: EMIT planar tweeters working on both speakers
Drivers: Checked for voice-coil rub and DC resistance
Crossovers: Inspected; capacitors measured against original values
Phase: Polarity checked on both speakers

Cosmetic Condition
Cabinets: Oak side panels with fluted edges and black front baffles
Grilles: Brown grille cloth with Infinity badge
Overall Presentation: Restored vintage loudspeakers, not factory-new. Please review all photos carefully – they show the actual pair being offered.

Inspected
New Woofer Foam Surrounds
Capacitors Measured
Phase Checked
Final Listening Test Completed
Final Technical QC Completed

SPECIFICATIONS
Brand: Infinity
Model: Reference Standard RS IIIB
Type: 3-Way Floorstanding Loudspeaker
Low-Frequency Drivers: 10-inch polypropylene woofers (two per speaker on this pair)
Midrange Driver: Polydome
High-Frequency Driver: EMIT planar tweeter
Frequency Response: 35 Hz – 32 kHz (±3 dB)
Nominal Impedance: 4 – 8 ohms
Recommended Amplifier Power: 50 – 200 watts per channel RMS
Crossover Frequencies: 600 Hz, 4 kHz
Dimensions: 48 × 18 × 7.75 Inches (121.9 × 45.7 × 19.7 cm)
Years Produced: 1982 – 1984

WHAT IS INCLUDED
1 Pair of Infinity RS IIIB Speakers
2 Grilles
Only the items specifically listed above are included. Any other equipment shown in the photos is for display only and is not included.

SHIPPING & PACKAGING
Your vintage audio equipment will be professionally packed by HQaudios using protective materials appropriate for its size, weight, and construction. Large or heavy items may be palletized and shipped by freight when required for safer transportation.
HQaudios Professional Shipping and Packaging

1-YEAR WARRANTY & CUSTOMER SUPPORT
Your purchase is backed by our 1-Year HQaudios Seller Warranty (this is an HQaudios warranty, not a Infinity manufacturer warranty). Our team provides support before and after your purchase. If you have questions about setup, operation, compatibility, or your order, please contact HQaudios for assistance.

MORE FROM HQAUDIOS

HQaudios Vintage Audio Repair and Restoration
HQaudios Custom Audio Projects

Reviews

There are no reviews yet.

Be the first to review “Infinity RS IIIB Floorstanding Speakers – Professionally Restored – 1-Year Warranty”

Recently viewed

You have not viewed any products yet.