Professionally inspected, tested, and serviced. Aging or degraded components have been replaced where necessary to restore performance as close as possible to original factory specifications.
Before Restoration
The cabinets showed scratches, worn veneer, dust inside the enclosures, dusty identification labels, damaged logos, and oxidized rear terminals. The front grille frames had broken joints.
The woofer surround and edge materials had deteriorated. Aging was also noted around the tweeter suspension and mounting edges. Both driver sections and the crossover networks required technical checks.
During Restoration
Drivers & Measurements: We inspected and tested each driver and measured DC resistance as part of the technical assessment.
Woofer Surrounds: We replaced the deteriorated surrounds and checked woofer cone movement after repair.
Tweeter Assemblies: We inspected the aged tweeter edge materials, mounting interfaces and high-frequency output.
Crossover Capacitors: We measured the capacitors and replaced units more than 5% outside tolerance with quality, correctly specified parts.
Crossover Networks: We inspected the passive networks, accessible solder joints and wiring connections.
HF Selectors & Knobs: We cleaned the control hardware and serviced the three-position high-frequency selectors.
Terminals & Wiring: We cleaned oxidized speaker terminals and inspected the internal wiring.
Cabinet Interiors: We removed accumulated dust and debris from accessible enclosure surfaces.
Cabinet Veneer & Finish: We repaired damaged veneer, prepared the cabinet surfaces and refinished them with PU lacquer.
Identification Labels & Logos: We cleaned the labels and fitted replacement KLH logos.
Grille Assemblies: We repaired and reinforced damaged grille-frame joints and restored the grille assemblies.
Driver Seals & Hardware: We checked driver mounting gaskets, cabinet sealing surfaces and accessible mounting hardware.
System Calibration: We adjusted and evaluated both speakers against the original KLH factory specifications.
After Restoration / Final Testing
Driver Playback: We checked both woofer and tweeter sections for proper sound output.
Controls & Frequency Sweep: We tested the rear HF selectors and performed speaker frequency-sweep and listening checks.
72-Hour Operational Test: We completed 72 hours of operational testing following restoration and calibration.
Final QC: Both speakers completed final functional and stereo listening checks and are ready for use.
Reviews
There are no reviews yet.